chrono::ChShaftsMotorSpeed Class Reference

Description

Motor to enforce the relative speed w(t) between two shafts, using a rheonomic constraint.

The relative speed represents an anglular velocity for rotational motor and a linear speed for linear motors. Note: no compliance is allowed, so if the actuator hits an undeformable obstacle it hits a pathological situation and the solver result can be unstable/unpredictable. Think at it as a servo drive with "infinitely stiff" control. This type of motor is very easy to use, stable and efficient, and should be used if the 'infinitely stiff' control assumption is a good approximation of what you simulate (e.g., very good and reactive controllers). By default it is initialized with constant angular speed: df/dt = 1. Use SetSpeedFunction() to change to other speed functions.

#include <ChShaftsMotorSpeed.h>

Inheritance diagram for chrono::ChShaftsMotorSpeed:
Collaboration diagram for chrono::ChShaftsMotorSpeed:

Public Member Functions

 ChShaftsMotorSpeed (const ChShaftsMotorSpeed &other)
 
virtual ChShaftsMotorSpeedClone () const override
 "Virtual" copy constructor (covariant return type).
 
void SetSpeedFunction (const std::shared_ptr< ChFunction > function)
 Sets the angular speed function s(t). More...
 
std::shared_ptr< ChFunctionGetSpeedFunction () const
 Gets the speed function s(t).
 
void SetOffset (double offset)
 Set initial offset (default: 0).
 
double GetOffset () const
 Get initial offset.
 
void AvoidDrift (bool avoid)
 Enable relative position drift avoidance (default: true). More...
 
bool Initialize (std::shared_ptr< ChShaft > shaft_1, std::shared_ptr< ChShaft > shaft_2) override
 Initialize this motor, given two shafts to join. More...
 
virtual double GetMotorLoad () const override
 Get the current motor torque between shaft2 and shaft1, expressed as applied to shaft1.
 
virtual void ArchiveOut (ChArchiveOut &archive_out) override
 Method to allow serialization of transient data to archives.
 
virtual void ArchiveIn (ChArchiveIn &archive_in) override
 Method to allow deserialization of transient data from archives. More...
 
- Public Member Functions inherited from chrono::ChShaftsMotor
 ChShaftsMotor (const ChShaftsMotor &other)
 
virtual double GetMotorPos () const
 Get the position of the motor, as position of shaft 1 with respect to 2. More...
 
virtual double GetMotorPosDt () const
 Get the motor speed, as speed of shaft 1 with respect to 2.
 
virtual double GetMotorPosDt2 () const
 Get the motor acceleration, as accelerations of shaft 1 with respect to 2.
 
virtual int GetMotorNumTurns () const
 Get number of full rotations for this shafts rotational motor. More...
 
virtual double GetMotorAngleWrapped () const
 Get the motor angle in the range [-pi, +pi]. More...
 
virtual double GetReaction1 () const override
 Get the reaction torque exchanged between the two shafts, considered as applied to the 1st axis.
 
virtual double GetReaction2 () const override
 Get the reaction torque exchanged between the two shafts, considered as applied to the 2nd axis.
 
- Public Member Functions inherited from chrono::ChShaftsCouple
 ChShaftsCouple (const ChShaftsCouple &other)
 
virtual unsigned int GetNumAffectedCoords ()
 Get the number of scalar variables affected by constraints in this couple.
 
ChShaftGetShaft1 () const
 Get the first (input) shaft.
 
ChShaftGetShaft2 () const
 Get the second (output) shaft.
 
double GetRelativePos () const
 Get the actual relative position (angle or displacement) in terms of phase of shaft 1 with respect to 2.
 
double GetRelativePosDt () const
 Get the actual relative speed (angle or displacement) of shaft 1 with respect to 2.
 
double GetRelativePosDt2 () const
 Get the actual relative acceleration (angle or displacement) of shaft 1 with respect to 2.
 
- Public Member Functions inherited from chrono::ChPhysicsItem
 ChPhysicsItem (const ChPhysicsItem &other)
 
ChSystemGetSystem () const
 Get the pointer to the parent ChSystem().
 
virtual void SetSystem (ChSystem *m_system)
 Set the pointer to the parent ChSystem(). More...
 
void AddVisualModel (std::shared_ptr< ChVisualModel > model)
 Add an (optional) visualization model. More...
 
std::shared_ptr< ChVisualModelGetVisualModel () const
 Access the visualization model (if any). More...
 
void AddVisualShape (std::shared_ptr< ChVisualShape > shape, const ChFrame<> &frame=ChFrame<>())
 Add the specified visual shape to the visualization model. More...
 
std::shared_ptr< ChVisualShapeGetVisualShape (unsigned int i) const
 Access the specified visualization shape in the visualization model (if any). More...
 
void AddVisualShapeFEA (std::shared_ptr< ChVisualShapeFEA > shapeFEA)
 Add the specified FEA visualization object to the visualization model. More...
 
std::shared_ptr< ChVisualShapeFEAGetVisualShapeFEA (unsigned int i) const
 Access the specified FEA visualization object in the visualization model (if any). More...
 
virtual ChFrame GetVisualModelFrame (unsigned int nclone=0) const
 Get the reference frame (expressed in and relative to the absolute frame) of the visual model. More...
 
virtual unsigned int GetNumVisualModelClones () const
 Return the number of clones of the visual model associated with this physics item. More...
 
void AddCamera (std::shared_ptr< ChCamera > camera)
 Attach a ChCamera to this physical item. More...
 
std::vector< std::shared_ptr< ChCamera > > GetCameras () const
 Get the set of cameras attached to this physics item.
 
virtual bool IsActive () const
 Return true if the object is active and included in dynamics.
 
virtual bool IsCollisionEnabled () const
 Tell if the object is subject to collision. More...
 
virtual void AddCollisionModelsToSystem (ChCollisionSystem *coll_sys) const
 Add to the provided collision system any collision models managed by this physics item. More...
 
virtual void RemoveCollisionModelsFromSystem (ChCollisionSystem *coll_sys) const
 Remove from the provided collision system any collision models managed by this physics item. More...
 
virtual void SyncCollisionModels ()
 Synchronize the position and bounding box of any collsion models managed by this physics item.
 
virtual ChAABB GetTotalAABB ()
 Get the entire AABB axis-aligned bounding box of the object. More...
 
virtual void GetCenter (ChVector3d &mcenter)
 Get a symbolic 'center' of the object. More...
 
virtual void Setup ()
 This might recompute the number of coordinates, DOFs, constraints, in case this might change (ex in ChAssembly), as well as state offsets of contained items (ex in ChMesh)
 
virtual void Update (bool update_assets=true)
 As above, but does not require updating of time-dependent data. More...
 
virtual void ForceToRest ()
 Set zero speed (and zero accelerations) in state, without changing the position. More...
 
virtual unsigned int GetNumCoordsVelLevel ()
 Get the number of coordinates at the velocity level. More...
 
virtual unsigned int GetNumConstraints ()
 Get the number of scalar constraints.
 
virtual unsigned int GetNumConstraintsUnilateral ()
 Get the number of unilateral scalar constraints.
 
unsigned int GetOffset_x ()
 Get offset in the state vector (position part)
 
unsigned int GetOffset_w ()
 Get offset in the state vector (speed part)
 
unsigned int GetOffset_L ()
 Get offset in the lagrangian multipliers.
 
void SetOffset_x (const unsigned int moff)
 Set offset in the state vector (position part) Note: only the ChSystem::Setup function should use this.
 
void SetOffset_w (const unsigned int moff)
 Set offset in the state vector (speed part) Note: only the ChSystem::Setup function should use this.
 
void SetOffset_L (const unsigned int moff)
 Set offset in the lagrangian multipliers Note: only the ChSystem::Setup function should use this.
 
virtual void IntStateIncrement (const unsigned int off_x, ChState &x_new, const ChState &x, const unsigned int off_v, const ChStateDelta &Dv)
 Computes x_new = x + Dt , using vectors at specified offsets. More...
 
virtual void IntStateGetIncrement (const unsigned int off_x, const ChState &x_new, const ChState &x, const unsigned int off_v, ChStateDelta &Dv)
 Computes Dt = x_new - x, using vectors at specified offsets. More...
 
virtual void InjectKRMMatrices (ChSystemDescriptor &descriptor)
 Register with the given system descriptor any ChKRMBlock objects associated with this item.
 
virtual void LoadKRMMatrices (double Kfactor, double Rfactor, double Mfactor)
 Compute and load current stiffnes (K), damping (R), and mass (M) matrices in encapsulated ChKRMBlock objects. More...
 
virtual void VariablesQbIncrementPosition (double step)
 Increment item positions by the 'qb' part of the ChVariables, multiplied by a 'step' factor. More...
 
virtual void ConstraintsBiLoad_Qc (double factor=1)
 Adds the current Qc (the vector of C_dtdt=0 -> [Cq]*q_dtdt=Qc ) to the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsFbLoadForces (double factor=1)
 Adds the current link-forces, if any, (caused by springs, etc.) to the 'fb' vectors of the ChVariables referenced by encapsulated ChConstraints.
 
- Public Member Functions inherited from chrono::ChObj
 ChObj (const ChObj &other)
 
int GetIdentifier () const
 Get the unique integer identifier of this object. More...
 
void SetTag (int tag)
 Set an object integer tag (default: -1). More...
 
int GetTag () const
 Get the tag of this object.
 
void SetName (const std::string &myname)
 Set the name of this object.
 
const std::string & GetName () const
 Get the name of this object.
 
double GetChTime () const
 Gets the simulation time of this object.
 
void SetChTime (double m_time)
 Sets the simulation time of this object.
 
virtual std::string & ArchiveContainerName ()
 

Additional Inherited Members

- Protected Member Functions inherited from chrono::ChObj
int GenerateUniqueIdentifier ()
 
- Protected Attributes inherited from chrono::ChShaftsCouple
ChShaftshaft1
 first shaft
 
ChShaftshaft2
 second shaft
 
- Protected Attributes inherited from chrono::ChPhysicsItem
ChSystemsystem
 parent system
 
std::shared_ptr< ChVisualModelInstancevis_model_instance
 instantiated visualization model
 
std::vector< std::shared_ptr< ChCamera > > cameras
 set of cameras
 
unsigned int offset_x
 offset in vector of state (position part)
 
unsigned int offset_w
 offset in vector of state (speed part)
 
unsigned int offset_L
 offset in vector of lagrangian multipliers
 
- Protected Attributes inherited from chrono::ChObj
double ChTime
 object simulation time
 
std::string m_name
 object name
 
int m_identifier
 object unique identifier
 
int m_tag
 user-supplied tag
 

Member Function Documentation

◆ ArchiveIn()

void chrono::ChShaftsMotorSpeed::ArchiveIn ( ChArchiveIn archive_in)
overridevirtual

Method to allow deserialization of transient data from archives.

Method to allow de serialization of transient data from archives.

Reimplemented from chrono::ChShaftsMotor.

◆ AvoidDrift()

void chrono::ChShaftsMotorSpeed::AvoidDrift ( bool  avoid)
inline

Enable relative position drift avoidance (default: true).

If true, the constraint is satisfied also at the position level, by integrating the velocity in a separate auxiliary state.

◆ Initialize()

bool chrono::ChShaftsMotorSpeed::Initialize ( std::shared_ptr< ChShaft shaft_1,
std::shared_ptr< ChShaft shaft_2 
)
overridevirtual

Initialize this motor, given two shafts to join.

The first shaft is the 'output' shaft of the motor, the second is the 'truss', often fixed and not rotating. The torque is applied to the output shaft, while the truss shafts gets the same torque but with opposite sign. Both shafts must belong to the same ChSystem.

Parameters
shaft_1first shaft to join (motor output shaft)
shaft_2second shaft to join (motor truss)

Reimplemented from chrono::ChShaftsCouple.

◆ SetSpeedFunction()

void chrono::ChShaftsMotorSpeed::SetSpeedFunction ( const std::shared_ptr< ChFunction function)
inline

Sets the angular speed function s(t).

Best if C0 continuous, otherwise it gives spikes in accelerations.


The documentation for this class was generated from the following files:
  • /builds/uwsbel/chrono/src/chrono/physics/ChShaftsMotorSpeed.h
  • /builds/uwsbel/chrono/src/chrono/physics/ChShaftsMotorSpeed.cpp