chrono::ChSystemSMC Class Reference

Description

Class for a physical system in which contact is modeled using a smooth (penalty-based) method.

#include <ChSystemSMC.h>

Inheritance diagram for chrono::ChSystemSMC:
Collaboration diagram for chrono::ChSystemSMC:

Public Types

enum  ContactForceModel { Hooke, Hertz, PlainCoulomb, Flores }
 Enum for SMC contact type. More...
 
enum  AdhesionForceModel { Constant, DMT, Perko }
 Enum for adhesion force model. More...
 
enum  TangentialDisplacementModel { None, OneStep, MultiStep }
 Enum for tangential displacement model. More...
 

Public Member Functions

 ChSystemSMC (bool use_material_properties=true)
 Constructor for ChSystemSMC.
 
 ChSystemSMC (const ChSystemSMC &other)
 Copy constructor.
 
virtual ChSystemSMCClone () const override
 "Virtual" copy constructor (covariant return type).
 
virtual ChContactMethod GetContactMethod () const override
 Return the contact method supported by this system.
 
virtual void SetContactContainer (std::shared_ptr< ChContactContainer > container) override
 Replace the contact container. More...
 
void UseMaterialProperties (bool val)
 Enable/disable using physical contact material properties. More...
 
bool UsingMaterialProperties () const
 Return true if contact coefficients are estimated from physical material properties.
 
void SetContactForceModel (ContactForceModel model)
 Set the normal contact force model.
 
ContactForceModel GetContactForceModel () const
 Get the current normal contact force model.
 
void SetAdhesionForceModel (AdhesionForceModel model)
 Set the adhesion force model.
 
AdhesionForceModel GetAdhesionForceModel () const
 Get the current adhesion force model.
 
void SetTangentialDisplacementModel (TangentialDisplacementModel model)
 Set the tangential displacement model. More...
 
TangentialDisplacementModel GetTangentialDisplacementModel () const
 Get the current tangential displacement model.
 
void SetStiffContact (bool val)
 Declare the contact forces as stiff. More...
 
bool GetStiffContact () const
 
void SetSlipVelocityThreshold (double vel)
 Slip velocity threshold. More...
 
double GetSlipVelocityThreshold () const
 
void SetCharacteristicImpactVelocity (double vel)
 Characteristic impact velocity (Hooke contact force model).
 
double GetCharacteristicImpactVelocity () const
 
virtual void ArchiveOUT (ChArchiveOut &marchive) override
 Method to allow serialization of transient data to archives.
 
virtual void ArchiveIN (ChArchiveIn &marchive) override
 Method to allow deserialization of transient data from archives. More...
 
- Public Member Functions inherited from chrono::ChSystem
 ChSystem ()
 Create a physical system.
 
 ChSystem (const ChSystem &other)
 Copy constructor.
 
virtual ~ChSystem ()
 Destructor.
 
void SetStep (double m_step)
 Sets the time step used for integration (dynamical simulation). More...
 
double GetStep () const
 Gets the current time step used for the integration (dynamical simulation).
 
void SetStepMin (double m_step_min)
 Sets the lower limit for time step (only needed if using integration methods which support time step adaption).
 
double GetStepMin () const
 Gets the lower limit for time step.
 
void SetStepMax (double m_step_max)
 Sets the upper limit for time step (only needed if using integration methods which support time step adaption).
 
double GetStepMax () const
 Gets the upper limit for time step.
 
void SetTimestepperType (ChTimestepper::Type type)
 Set the method for time integration (time stepper type). More...
 
ChTimestepper::Type GetTimestepperType () const
 Get the current method for time integration (time stepper type).
 
void SetTimestepper (std::shared_ptr< ChTimestepper > mstepper)
 Set the timestepper object to be used for time integration.
 
std::shared_ptr< ChTimestepperGetTimestepper () const
 Get the timestepper currently used for time integration.
 
void SetMaxiter (int m_maxiter)
 Sets outer iteration limit for assembly constraints. More...
 
int GetMaxiter () const
 Gets iteration limit for assembly constraints.
 
virtual void SetMaterialCompositionStrategy (std::unique_ptr< ChMaterialCompositionStrategy > &&strategy)
 Change the default composition laws for contact surface materials (coefficient of friction, cohesion, compliance, etc.)
 
const ChMaterialCompositionStrategyGetMaterialCompositionStrategy () const
 Accessor for the current composition laws for contact surface material.
 
void SetMinBounceSpeed (double mval)
 For elastic collisions, with objects that have nonzero restitution coefficient: objects will rebounce only if their relative colliding speed is above this threshold. More...
 
double GetMinBounceSpeed () const
 Objects will rebounce only if their relative colliding speed is above this threshold.
 
void SetMaxPenetrationRecoverySpeed (double mval)
 For the default stepper, you can limit the speed of exiting from penetration situations. More...
 
double GetMaxPenetrationRecoverySpeed () const
 Get the limit on the speed for exiting from penetration situations (for Anitescu stepper)
 
virtual void SetSolver (std::shared_ptr< ChSolver > newsolver)
 Attach a solver (derived from ChSolver) for use by this system.
 
virtual std::shared_ptr< ChSolverGetSolver ()
 Access the solver currently associated with this system.
 
void SetSolverType (ChSolver::Type type)
 Choose the solver type, to be used for the simultaneous solution of the constraints in dynamical simulations (as well as in kinematics, statics, etc.) More...
 
ChSolver::Type GetSolverType () const
 Gets the current solver type.
 
void SetSolverMaxIterations (int max_iters)
 Set the maximum number of iterations, if using an iterative solver. More...
 
int GetSolverMaxIterations () const
 Get the current maximum number of iterations, if using an iterative solver. More...
 
void SetSolverTolerance (double tolerance)
 Set the solver tolerance threshold (used with iterative solvers only). More...
 
double GetSolverTolerance () const
 Get the current tolerance value (used with iterative solvers only).
 
void SetSolverForceTolerance (double tolerance)
 Set a solver tolerance threshold at force level (default: not specified). More...
 
double GetSolverForceTolerance () const
 Get the current value of the force-level tolerance (used with iterative solvers only).
 
void SetSystemDescriptor (std::shared_ptr< ChSystemDescriptor > newdescriptor)
 Instead of using the default 'system descriptor', you can create your own custom descriptor (inherited from ChSystemDescriptor) and plug it into the system using this function.
 
std::shared_ptr< ChSystemDescriptorGetSystemDescriptor ()
 Access directly the 'system descriptor'.
 
void Set_G_acc (const ChVector<> &m_acc)
 Set the G (gravity) acceleration vector, affecting all the bodies in the system.
 
const ChVectorGet_G_acc () const
 Get the G (gravity) acceleration vector affecting all the bodies in the system.
 
double GetChTime () const
 Get the simulation time of this system.
 
void SetChTime (double time)
 Set (overwrite) the simulation time of this system.
 
virtual void SetNumThreads (int num_threads_chrono, int num_threads_collision=0, int num_threads_eigen=0)
 Set the number of OpenMP threads used by Chrono itself, Eigen, and the collision detection system. More...
 
int GetNumThreadsChrono () const
 
int GetNumthreadsCollision () const
 
int GetNumthreadsEigen () const
 
const ChAssemblyGetAssembly () const
 Get the underlying assembly containing all physics items.
 
virtual void AddBody (std::shared_ptr< ChBody > body)
 Attach a body to the underlying assembly.
 
virtual void AddLink (std::shared_ptr< ChLinkBase > link)
 Attach a link to the underlying assembly.
 
virtual void AddMesh (std::shared_ptr< fea::ChMesh > mesh)
 Attach a mesh to the underlying assembly.
 
virtual void AddOtherPhysicsItem (std::shared_ptr< ChPhysicsItem > item)
 Attach a ChPhysicsItem object that is not a body, link, or mesh.
 
void Add (std::shared_ptr< ChPhysicsItem > item)
 Attach an arbitrary ChPhysicsItem (e.g. More...
 
void AddBatch (std::shared_ptr< ChPhysicsItem > item)
 Items added in this way are added like in the Add() method, but not instantly, they are simply queued in a batch of 'to add' items, that are added automatically at the first Setup() call. More...
 
void FlushBatch ()
 If some items are queued for addition in the assembly, using AddBatch(), this will effectively add them and clean the batch. More...
 
virtual void RemoveBody (std::shared_ptr< ChBody > body)
 Remove a body from this assembly.
 
virtual void RemoveLink (std::shared_ptr< ChLinkBase > link)
 Remove a link from this assembly.
 
virtual void RemoveMesh (std::shared_ptr< fea::ChMesh > mesh)
 Remove a mesh from the assembly.
 
virtual void RemoveOtherPhysicsItem (std::shared_ptr< ChPhysicsItem > item)
 Remove a ChPhysicsItem object that is not a body or a link.
 
void Remove (std::shared_ptr< ChPhysicsItem > item)
 Remove arbitrary ChPhysicsItem that was added to the underlying assembly.
 
void RemoveAllBodies ()
 Remove all bodies from the underlying assembly.
 
void RemoveAllLinks ()
 Remove all links from the underlying assembly.
 
void RemoveAllMeshes ()
 Remove all meshes from the underlying assembly.
 
void RemoveAllOtherPhysicsItems ()
 Remove all physics items not in the body, link, or mesh lists.
 
const std::vector< std::shared_ptr< ChBody > > & Get_bodylist () const
 Get the list of bodies.
 
const std::vector< std::shared_ptr< ChLinkBase > > & Get_linklist () const
 Get the list of links.
 
const std::vector< std::shared_ptr< fea::ChMesh > > & Get_meshlist () const
 Get the list of meshes.
 
const std::vector< std::shared_ptr< ChPhysicsItem > > & Get_otherphysicslist () const
 Get the list of physics items that are not in the body or link lists.
 
std::shared_ptr< ChBodySearchBody (const char *name)
 Search a body by its name.
 
std::shared_ptr< ChLinkBaseSearchLink (const char *name)
 Search a link by its name.
 
std::shared_ptr< fea::ChMeshSearchMesh (const char *name)
 Search a mesh by its name.
 
std::shared_ptr< ChPhysicsItemSearchOtherPhysicsItem (const char *name)
 Search from other ChPhysics items (not bodies, links, or meshes) by name.
 
std::shared_ptr< ChMarkerSearchMarker (const char *name)
 Search a marker by its name.
 
std::shared_ptr< ChPhysicsItemSearch (const char *name)
 Search an item (body, link or other ChPhysics items) by name.
 
std::shared_ptr< ChBodySearchBodyID (int bodyID)
 Search a body by its ID.
 
std::shared_ptr< ChMarkerSearchMarker (int markID)
 Search a marker by its unique ID.
 
int GetNbodies () const
 Get the number of active bodies (excluding those that are sleeping or are fixed to ground).
 
int GetNbodiesSleeping () const
 Get the number of bodies that are in sleeping mode (excluding fixed bodies).
 
int GetNbodiesFixed () const
 Get the number of bodies that are fixed to ground.
 
int GetNbodiesTotal () const
 Get the total number of bodies in the assembly, including the grounded and sleeping bodies.
 
int GetNlinks () const
 Get the number of links.
 
int GetNmeshes () const
 Get the number of meshes.
 
int GetNphysicsItems () const
 Get the number of other physics items (other than bodies, links, or meshes).
 
int GetNcoords () const
 Get the number of coordinates (considering 7 coords for rigid bodies because of the 4 dof of quaternions).
 
int GetNdof () const
 Get the number of degrees of freedom of the assembly.
 
int GetNdoc () const
 Get the number of scalar constraints added to the assembly, including constraints on quaternion norms.
 
int GetNsysvars () const
 Get the number of system variables (coordinates plus the constraint multipliers, in case of quaternions).
 
int GetNcoords_w () const
 Get the number of coordinates (considering 6 coords for rigid bodies, 3 transl.+3rot.)
 
int GetNdoc_w () const
 Get the number of scalar constraints added to the assembly.
 
int GetNdoc_w_C () const
 Get the number of scalar constraints added to the assembly (only bilaterals).
 
int GetNdoc_w_D () const
 Get the number of scalar constraints added to the assembly (only unilaterals).
 
int GetNsysvars_w () const
 Get the number of system variables (coordinates plus the constraint multipliers).
 
int GetDOF () const
 Get the number of scalar coordinates (ex. dim of position vector)
 
int GetDOF_w () const
 Get the number of scalar coordinates of variables derivatives (ex. dim of speed vector)
 
int GetDOC () const
 Get the number of scalar constraints, if any, in this item.
 
int GetDOC_c () const
 Get the number of scalar constraints, if any, in this item (only bilateral constr.)
 
int GetDOC_d () const
 Get the number of scalar constraints, if any, in this item (only unilateral constr.)
 
void ShowHierarchy (ChStreamOutAscii &m_file, int level=0) const
 Write the hierarchy of contained bodies, markers, etc. More...
 
void Clear ()
 Removes all bodies/marker/forces/links/contacts, also resets timers and events.
 
virtual ChBodyNewBody ()
 Create and return the pointer to a new body. More...
 
virtual ChBodyAuxRefNewBodyAuxRef ()
 Create and return the pointer to a new body with auxiliary reference frame. More...
 
void Reference_LM_byID ()
 Given inserted markers and links, restores the pointers of links to markers given the information about the marker IDs. More...
 
int GetNcontacts ()
 Gets the number of contacts.
 
virtual double GetTimerStep () const
 Return the time (in seconds) spent for computing the time step.
 
virtual double GetTimerAdvance () const
 Return the time (in seconds) for time integration, within the time step.
 
virtual double GetTimerLSsolve () const
 Return the time (in seconds) for the solver, within the time step. More...
 
virtual double GetTimerLSsetup () const
 Return the time (in seconds) for the solver Setup phase, within the time step.
 
virtual double GetTimerJacobian () const
 Return the time (in seconds) for calculating/loading Jacobian information, within the time step.
 
virtual double GetTimerCollision () const
 Return the time (in seconds) for runnning the collision detection step, within the time step.
 
virtual double GetTimerSetup () const
 Return the time (in seconds) for system setup, within the time step.
 
virtual double GetTimerUpdate () const
 Return the time (in seconds) for updating auxiliary data, within the time step.
 
double GetTimerCollisionBroad () const
 Return the time (in seconds) for broadphase collision detection, within the time step.
 
double GetTimerCollisionNarrow () const
 Return the time (in seconds) for narrowphase collision detection, within the time step.
 
void ResetTimers ()
 Resets the timers.
 
virtual void Setup ()
 Counts the number of bodies and links. More...
 
void Update (double mytime, bool update_assets=true)
 Updates all the auxiliary data and children of bodies, forces, links, given their current state.
 
void Update (bool update_assets=true)
 Updates all the auxiliary data and children of bodies, forces, links, given their current state.
 
void ForceUpdate ()
 In normal usage, no system update is necessary at the beginning of a new dynamics step (since an update is performed at the end of a step). More...
 
void IntToDescriptor (const unsigned int off_v, const ChStateDelta &v, const ChVectorDynamic<> &R, const unsigned int off_L, const ChVectorDynamic<> &L, const ChVectorDynamic<> &Qc)
 
void IntFromDescriptor (const unsigned int off_v, ChStateDelta &v, const unsigned int off_L, ChVectorDynamic<> &L)
 
void InjectVariables (ChSystemDescriptor &mdescriptor)
 
void InjectConstraints (ChSystemDescriptor &mdescriptor)
 
void ConstraintsLoadJacobians ()
 
void InjectKRMmatrices (ChSystemDescriptor &mdescriptor)
 
void KRMmatricesLoad (double Kfactor, double Rfactor, double Mfactor)
 
void VariablesFbReset ()
 
void VariablesFbLoadForces (double factor=1)
 
void VariablesQbLoadSpeed ()
 
void VariablesFbIncrementMq ()
 
void VariablesQbSetSpeed (double step=0)
 
void VariablesQbIncrementPosition (double step)
 
void ConstraintsBiReset ()
 
void ConstraintsBiLoad_C (double factor=1, double recovery_clamp=0.1, bool do_clamp=false)
 
void ConstraintsBiLoad_Ct (double factor=1)
 
void ConstraintsBiLoad_Qc (double factor=1)
 
void ConstraintsFbLoadForces (double factor=1)
 
void ConstraintsFetch_react (double factor=1)
 
virtual int GetNcoords_x () override
 Tells the number of position coordinates x in y = {x, v}.
 
virtual int GetNcoords_v () override
 Tells the number of speed coordinates of v in y = {x, v} and dy/dt={v, a}.
 
virtual int GetNconstr () override
 Tells the number of lagrangian multipliers (constraints)
 
virtual void StateGather (ChState &x, ChStateDelta &v, double &T) override
 From system to state y={x,v}.
 
virtual void StateScatter (const ChState &x, const ChStateDelta &v, const double T, bool full_update) override
 From state Y={x,v} to system. This also triggers an update operation.
 
virtual void StateGatherAcceleration (ChStateDelta &a) override
 From system to state derivative (acceleration), some timesteppers might need last computed accel.
 
virtual void StateScatterAcceleration (const ChStateDelta &a) override
 From state derivative (acceleration) to system, sometimes might be needed.
 
virtual void StateGatherReactions (ChVectorDynamic<> &L) override
 From system to reaction forces (last computed) - some timestepper might need this.
 
virtual void StateScatterReactions (const ChVectorDynamic<> &L) override
 From reaction forces to system, ex. store last computed reactions in ChLink objects for plotting etc.
 
virtual void StateIncrementX (ChState &x_new, const ChState &x, const ChStateDelta &Dx) override
 Perform x_new = x + dx, for x in Y = {x, dx/dt}. More...
 
virtual bool StateSolveCorrection (ChStateDelta &Dv, ChVectorDynamic<> &L, const ChVectorDynamic<> &R, const ChVectorDynamic<> &Qc, const double c_a, const double c_v, const double c_x, const ChState &x, const ChStateDelta &v, const double T, bool force_state_scatter, bool full_update, bool force_setup) override
 Assuming a DAE of the form. More...
 
virtual void LoadResidual_F (ChVectorDynamic<> &R, const double c) override
 Increment a vector R with the term c*F: R += c*F. More...
 
virtual void LoadResidual_Mv (ChVectorDynamic<> &R, const ChVectorDynamic<> &w, const double c) override
 Increment a vector R with a term that has M multiplied a given vector w: R += c*M*w. More...
 
virtual void LoadResidual_CqL (ChVectorDynamic<> &R, const ChVectorDynamic<> &L, const double c) override
 Increment a vectorR with the term Cq'*L: R += c*Cq'*L. More...
 
virtual void LoadConstraint_C (ChVectorDynamic<> &Qc, const double c, const bool do_clamp=false, const double clamp=1e30) override
 Increment a vector Qc with the term C: Qc += c*C. More...
 
virtual void LoadConstraint_Ct (ChVectorDynamic<> &Qc, const double c) override
 Increment a vector Qc with the term Ct = partial derivative dC/dt: Qc += c*Ct. More...
 
virtual void CustomEndOfStep ()
 Executes custom processing at the end of step. More...
 
double ComputeCollisions ()
 Perform the collision detection. More...
 
void RegisterCustomCollisionCallback (std::shared_ptr< CustomCollisionCallback > callback)
 Specify a callback object to be invoked at each collision detection step. More...
 
void UnregisterCustomCollisionCallback (std::shared_ptr< CustomCollisionCallback > callback)
 Remove the given collision callback from this system.
 
virtual void SetCollisionSystemType (collision::ChCollisionSystemType type)
 Change the underlying collision detection system to the specified type. More...
 
virtual void SetCollisionSystem (std::shared_ptr< collision::ChCollisionSystem > newcollsystem)
 Change the underlying collision system. More...
 
std::shared_ptr< collision::ChCollisionSystemGetCollisionSystem () const
 Access the underlying collision system. More...
 
virtual void SetContactContainer (collision::ChCollisionSystemType type)
 Change the underlying contact container given the specified type of the collision detection system. More...
 
std::shared_ptr< ChContactContainerGetContactContainer () const
 Access the underlying contact container. More...
 
void SetUseSleeping (bool ms)
 Turn on this feature to let the system put to sleep the bodies whose motion has almost come to a rest. More...
 
bool GetUseSleeping () const
 Tell if the system will put to sleep the bodies whose motion has almost come to a rest.
 
int DoStepDynamics (double step_size)
 Advances the dynamical simulation for a single step, of length step_size. More...
 
bool DoFrameDynamics (double end_time)
 Performs integration until the m_endtime is exactly reached, but current time step may be automatically "retouched" to meet exactly the m_endtime after n steps. More...
 
bool DoEntireDynamics (double end_time)
 Given the current state, the sw simulates the dynamical behavior of the system, until the end time is reached, repeating many steps (maybe the step size will be automatically changed if the integrator method supports step size adaption).
 
bool DoEntireUniformDynamics (double end_time, double frame_step)
 Like "DoEntireDynamics", but results are provided at uniform steps "frame_step", using the DoFrameDynamics() many times.
 
size_t GetStepcount () const
 Return the total number of time steps taken so far.
 
void ResetStepcount ()
 Reset to 0 the total number of time steps.
 
int GetSolverCallsCount () const
 Return the number of calls to the solver's Solve() function. More...
 
int GetSolverSetupCount () const
 Return the number of calls to the solver's Setup() function. More...
 
void SetDumpSolverMatrices (bool md)
 Set this to "true" to enable automatic saving of solver matrices at each time step, for debugging purposes. More...
 
bool GetDumpSolverMatrices () const
 
void DumpSystemMatrices (bool save_M, bool save_K, bool save_R, bool save_Cq, const char *path)
 Dump the current M mass matrix, K damping matrix, R damping matrix, Cq constraint jacobian matrix (at the current configuration). More...
 
void GetMassMatrix (ChSparseMatrix *M)
 Compute the system-level mass matrix. More...
 
void GetStiffnessMatrix (ChSparseMatrix *K)
 Compute the system-level stiffness matrix, i.e. More...
 
void GetDampingMatrix (ChSparseMatrix *R)
 Compute the system-level damping matrix, i.e. More...
 
void GetConstraintJacobianMatrix (ChSparseMatrix *Cq)
 Compute the system-level constraint jacobian matrix, i.e. More...
 
bool DoStepKinematics (double step_size)
 Advances the kinematic simulation for a single step of given length.
 
bool DoFrameKinematics (double end_time)
 Performs kinematics until the end time is exactly reached. More...
 
bool DoEntireKinematics (double end_time)
 Given the current state, this kinematic simulation satisfies all the constraints with the "DoStepKinematics" procedure for each time step, from the current time to the end time.
 
bool DoAssembly (int action)
 Given the current time and state, attempt to satisfy all constraints, using a Newton-Raphson iteration loop. More...
 
bool DoFullAssembly ()
 Shortcut for full position/velocity/acceleration assembly.
 
bool DoStaticAnalysis (std::shared_ptr< ChStaticAnalysis > analysis)
 Perform a generic static analysis. More...
 
bool DoStaticLinear ()
 Solve the position of static equilibrium (and the reactions). More...
 
bool DoStaticNonlinear (int nsteps=10, bool verbose=false)
 Solve the position of static equilibrium (and the reactions). More...
 
bool DoStaticNonlinearRheonomic (int nsteps=10, bool verbose=false, std::shared_ptr< ChStaticNonLinearRheonomicAnalysis::IterationCallback > mcallback=nullptr)
 Solve the position of static equilibrium (and the reactions). More...
 
bool DoStaticRelaxing (int nsteps=10)
 Finds the position of static equilibrium (and the reactions) starting from the current position. More...
 
int FileProcessChR (ChStreamInBinary &m_file)
 Process a ".chr" binary file containing the full system object hierarchy as exported -for example- by the R3D modeler, with chrono plug-in version, or by using the FileWriteChR() function.
 
int FileWriteChR (ChStreamOutBinary &m_file)
 Write a ".chr" binary file containing the full system object hierarchy (bodies, forces, links, etc.) (deprecated function - obsolete)
 
- Public Member Functions inherited from chrono::ChIntegrableIIorder
virtual int GetNcoords_a ()
 Return the number of acceleration coordinates of a in dy/dt={v, a} This is a default implementation that works in almost all cases, as dim(a) = dim(v),.
 
virtual void StateSetup (ChState &x, ChStateDelta &v, ChStateDelta &a)
 Set up the system state with separate II order components x, v, a for y = {x, v} and dy/dt={v, a}.
 
virtual bool StateSolveA (ChStateDelta &Dvdt, ChVectorDynamic<> &L, const ChState &x, const ChStateDelta &v, const double T, const double dt, bool force_state_scatter, bool full_update)
 Solve for accelerations: a = f(x,v,t) Given current state y={x,v} , computes acceleration a in the state derivative dy/dt={v,a} and lagrangian multipliers L (if any). More...
 
virtual int GetNcoords_y () override
 Return the number of coordinates in the state Y. More...
 
virtual int GetNcoords_dy () override
 Return the number of coordinates in the state increment. More...
 
virtual void StateGather (ChState &y, double &T) override
 Gather system state in specified array. More...
 
virtual void StateScatter (const ChState &y, const double T, bool full_update) override
 Scatter the states from the provided array to the system. More...
 
virtual void StateGatherDerivative (ChStateDelta &Dydt) override
 Gather from the system the state derivatives in specified array. More...
 
virtual void StateScatterDerivative (const ChStateDelta &Dydt) override
 Scatter the state derivatives from the provided array to the system. More...
 
virtual void StateIncrement (ChState &y_new, const ChState &y, const ChStateDelta &Dy) override
 Increment state array: y_new = y + Dy. More...
 
virtual bool StateSolve (ChStateDelta &dydt, ChVectorDynamic<> &L, const ChState &y, const double T, const double dt, bool force_state_scatter, bool full_update) override
 Solve for state derivatives: dy/dt = f(y,t). More...
 
virtual bool StateSolveCorrection (ChStateDelta &Dy, ChVectorDynamic<> &L, const ChVectorDynamic<> &R, const ChVectorDynamic<> &Qc, const double a, const double b, const ChState &y, const double T, const double dt, bool force_state_scatter, bool full_update, bool force_setup) override final
 Override of method for Ist order implicit integrators. More...
 
- Public Member Functions inherited from chrono::ChIntegrable
virtual void StateSetup (ChState &y, ChStateDelta &dy)
 Set up the system state.
 
virtual void LoadResidual_Hv (ChVectorDynamic<> &R, const ChVectorDynamic<> &v, const double c)
 Increment a vector R (usually the residual in a Newton Raphson iteration for solving an implicit integration step) with a term that has H multiplied a given vector w: R += c*H*w. More...
 

Additional Inherited Members

- Protected Member Functions inherited from chrono::ChSystem
virtual void DescriptorPrepareInject (ChSystemDescriptor &mdescriptor)
 Pushes all ChConstraints and ChVariables contained in links, bodies, etc. into the system descriptor.
 
void SetupInitial ()
 Initial system setup before analysis. More...
 
virtual ChVector GetBodyAppliedForce (ChBody *body)
 Return the resultant applied force on the specified body. More...
 
virtual ChVector GetBodyAppliedTorque (ChBody *body)
 Return the resultant applied torque on the specified body. More...
 
- Protected Attributes inherited from chrono::ChSystem
ChAssembly assembly
 
std::shared_ptr< ChContactContainercontact_container
 the container of contacts
 
ChVector G_acc
 gravitational acceleration
 
bool is_initialized
 if false, an initial setup is required (i.e. a call to SetupInitial)
 
bool is_updated
 if false, a new update is required (i.e. a call to Update)
 
int ncoords
 number of scalar coordinates (including 4th dimension of quaternions) for all active bodies
 
int ndoc
 number of scalar constraints (including constr. on quaternions)
 
int nsysvars
 number of variables (coords+lagrangian mult.), i.e. = ncoords+ndoc for all active bodies
 
int ncoords_w
 number of scalar coordinates when using 3 rot. dof. per body; for all active bodies
 
int ndoc_w
 number of scalar constraints when using 3 rot. dof. per body; for all active bodies
 
int nsysvars_w
 number of variables when using 3 rot. dof. per body; i.e. = ncoords_w+ndoc_w
 
int ndof
 number of degrees of freedom, = ncoords-ndoc = ncoords_w-ndoc_w ,
 
int ndoc_w_C
 number of scalar constraints C, when using 3 rot. dof. per body (excluding unilaterals)
 
int ndoc_w_D
 number of scalar constraints D, when using 3 rot. dof. per body (only unilaterals)
 
double ch_time
 simulation time of the system
 
double step
 time step
 
double step_min
 min time step
 
double step_max
 max time step
 
double tol_force
 tolerance for forces (used to obtain a tolerance for impulses)
 
int maxiter
 max iterations for nonlinear convergence in DoAssembly()
 
bool use_sleeping
 if true, put to sleep objects that come to rest
 
std::shared_ptr< ChSystemDescriptordescriptor
 system descriptor
 
std::shared_ptr< ChSolversolver
 solver for DVI or DAE problem
 
double min_bounce_speed
 minimum speed for rebounce after impacts. Lower speeds are clamped to 0
 
double max_penetration_recovery_speed
 limit for the speed of penetration recovery (positive, speed of exiting)
 
size_t stepcount
 internal counter for steps
 
int setupcount
 number of calls to the solver's Setup()
 
int solvecount
 number of StateSolveCorrection (reset to 0 at each timestep of static analysis)
 
bool dump_matrices
 for debugging
 
int ncontacts
 total number of contacts
 
collision::ChCollisionSystemType collision_system_type
 type of the collision engine
 
std::shared_ptr< collision::ChCollisionSystemcollision_system
 collision engine
 
std::vector< std::shared_ptr< CustomCollisionCallback > > collision_callbacks
 user-defined collision callbacks
 
std::unique_ptr< ChMaterialCompositionStrategycomposition_strategy
 
int nthreads_chrono
 material composition strategy
 
int nthreads_eigen
 
int nthreads_collision
 
ChTimer< double > timer_step
 timer for integration step
 
ChTimer< double > timer_advance
 timer for time integration
 
ChTimer< double > timer_ls_solve
 timer for solver (excluding setup phase)
 
ChTimer< double > timer_ls_setup
 timer for solver setup
 
ChTimer< double > timer_jacobian
 timer for computing/loading Jacobian information
 
ChTimer< double > timer_collision
 timer for collision detection
 
ChTimer< double > timer_setup
 timer for system setup
 
ChTimer< double > timer_update
 timer for system update
 
std::shared_ptr< ChTimesteppertimestepper
 time-stepper object
 
bool last_err
 indicates error over the last kinematic/dynamics/statics
 
ChVectorDynamic applied_forces
 system-wide vector of applied forces (lazy evaluation)
 
bool applied_forces_current
 indicates if system-wide vector of forces is up-to-date
 

Member Enumeration Documentation

◆ AdhesionForceModel

Enum for adhesion force model.

Enumerator
Constant 

constant adhesion force

DMT 

Derjagin-Muller-Toropov model.

Perko 

Perko et al. (2001) model.

◆ ContactForceModel

Enum for SMC contact type.

Enumerator
Hooke 

linear Hookean model

Hertz 

nonlinear Hertzian model

PlainCoulomb 

basic tangential force definition for non-granular bodies

Flores 

nonlinear Hertzian model

◆ TangentialDisplacementModel

Enum for tangential displacement model.

Enumerator
None 

no tangential force

OneStep 

use only current relative tangential velocity

MultiStep 

use contact history (from contact initiation)

Member Function Documentation

◆ ArchiveIN()

void chrono::ChSystemSMC::ArchiveIN ( ChArchiveIn marchive)
overridevirtual

Method to allow deserialization of transient data from archives.

Method to allow de serialization of transient data from archives.

Reimplemented from chrono::ChSystem.

◆ SetContactContainer()

void chrono::ChSystemSMC::SetContactContainer ( std::shared_ptr< ChContactContainer container)
overridevirtual

Replace the contact container.

The provided container object must be inherited from ChContactContainerSMC.

Reimplemented from chrono::ChSystem.

◆ SetSlipVelocityThreshold()

void chrono::ChSystemSMC::SetSlipVelocityThreshold ( double  vel)

Slip velocity threshold.

No tangential contact forces are generated if the magnitude of the tangential relative velocity is below this value.

◆ SetStiffContact()

void chrono::ChSystemSMC::SetStiffContact ( bool  val)
inline

Declare the contact forces as stiff.

If true, this enables calculation of contact force Jacobians.

◆ SetTangentialDisplacementModel()

void chrono::ChSystemSMC::SetTangentialDisplacementModel ( TangentialDisplacementModel  model)
inline

Set the tangential displacement model.

Note that currently MultiStep falls back to OneStep.

◆ UseMaterialProperties()

void chrono::ChSystemSMC::UseMaterialProperties ( bool  val)
inline

Enable/disable using physical contact material properties.

If true, contact coefficients are estimated from physical material properties. Otherwise, explicit values of stiffness and damping coefficients are used.


The documentation for this class was generated from the following files:
  • /builds/uwsbel/chrono/src/chrono/physics/ChSystemSMC.h
  • /builds/uwsbel/chrono/src/chrono/physics/ChSystemSMC.cpp