chrono::fea::ChBeamSectionRayleighEasyCircular Class Reference
Description
This works exactly as ChBeamSectionEulerEasyCircular, but adds the effect of Jyy Jzz rotational sectional inertias.
#include <ChBeamSectionEuler.h>
Inheritance diagram for chrono::fea::ChBeamSectionRayleighEasyCircular:
Collaboration diagram for chrono::fea::ChBeamSectionRayleighEasyCircular:
Public Member Functions  
ChBeamSectionRayleighEasyCircular (double diameter, double E, double G, double density)  
Public Member Functions inherited from chrono::fea::ChBeamSectionRayleighSimple  
virtual void  ComputeInertiaMatrix (ChMatrixNM< double, 6, 6 > &M) override 
Compute the 6x6 sectional inertia matrix, as in {x_momentum,w_momentum}=[Mm]{xvel,wvel}.  
Public Member Functions inherited from chrono::fea::ChBeamSectionEulerSimple  
void  SetArea (const double ma) 
Set the cross sectional area A of the beam (m^2)  
double  GetArea () const 
void  SetIyy (double ma) 
Set the Iyy moment of inertia of the beam (for flexion about y axis) Note: some textbook calls this Iyy as Iz.  
double  GetIyy () const 
void  SetIzz (double ma) 
Set the Izz moment of inertia of the beam (for flexion about z axis) Note: some textbook calls this Izz as Iy.  
double  GetIzz () const 
void  SetJ (double ma) 
Set the J torsion constant of the beam (for torsion about x axis)  
double  GetJ () const 
void  SetKsy (double ma) 
Set the Timoshenko shear coefficient Ks for y shear, usually about 0.8, (for elements that use this, ex. More...  
double  GetKsy () const 
void  SetKsz (double ma) 
Set the Timoshenko shear coefficient Ks for z shear, usually about 0.8, (for elements that use this, ex. More...  
double  GetKsz () const 
void  SetAsRectangularSection (double width_y, double width_z) 
Shortcut: set Area, Ixx, Iyy, Ksy, Ksz and J torsion constant at once, given the y and z widths of the beam assumed with rectangular shape.  
void  SetAsCircularSection (double diameter) 
Shortcut: set Area, Ixx, Iyy, Ksy, Ksz and J torsion constant at once, given the diameter of the beam assumed with circular shape.  
void  SetDensity (double md) 
Set the density of the beam (kg/m^3)  
double  GetDensity () const 
void  SetYoungModulus (double mE) 
Set E, the Young elastic modulus (N/m^2)  
double  GetYoungModulus () const 
void  SetGshearModulus (double mG) 
Set G, the shear modulus, used for computing the torsion rigidity = J*G.  
double  GetGshearModulus () const 
void  SetGwithPoissonRatio (double mpoisson) 
Set G, the shear modulus, given current E and the specified Poisson ratio.  
virtual double  GetAxialRigidity () const override 
Gets the axial rigidity, usually A*E, but might be ad hoc.  
virtual double  GetXtorsionRigidity () const override 
Gets the torsion rigidity, for torsion about X axis at elastic center, usually J*G, but might be ad hoc.  
virtual double  GetYbendingRigidity () const override 
Gets the bending rigidity, for bending about Y axis at elastic center, usually Iyy*E, but might be ad hoc.  
virtual double  GetZbendingRigidity () const override 
Gets the bending rigidity, for bending about Z axis at elastic center, usually Izz*E, but might be ad hoc.  
virtual double  GetSectionRotation () const override 
Set the rotation of the Y Z section axes for which the YbendingRigidity and ZbendingRigidity are defined.  
virtual double  GetCentroidY () const override 
Gets the Y position of the elastic center respect to centerline.  
virtual double  GetCentroidZ () const override 
Gets the Z position of the elastic center respect to centerline.  
virtual double  GetShearCenterY () const override 
Gets the Y position of the shear center respect to centerline.  
virtual double  GetShearCenterZ () const override 
Gets the Z position of the shear center respect to centerline.  
virtual void  ComputeQuadraticTerms (ChVector<> &mF, ChVector<> &mT, const ChVector<> &mW) override 
Compute the centrifugal term and gyroscopic term.  
virtual double  GetMassPerUnitLength () const override 
Get mass per unit length, ex.SI units [kg/m].  
virtual double  GetInertiaJxxPerUnitLength () const override 
Get the Jxx component of the inertia per unit length (polar inertia) in the Y Z unrotated reference frame of the section at centerline. More...  
Public Member Functions inherited from chrono::fea::ChBeamSectionEuler  
void  SetArtificialJyyJzzFactor (double mf) 
The Euler beam model has no rotational inertia per each section, assuming mass is concentrated on the centerline. More...  
double  GetArtificialJyyJzzFactor () 
void  SetBeamRaleyghDamping (double mr) 
Set the Rayleigh damping ratio r (as in: R = r * K ), to do: also massproportional term.  
double  GetBeamRaleyghDamping () 
Public Member Functions inherited from chrono::fea::ChBeamSection  
void  SetDrawShape (std::shared_ptr< ChBeamSectionShape > mshape) 
Set the graphical representation for this section. More...  
std::shared_ptr< ChBeamSectionShape >  GetDrawShape () const 
Get the drawing shape of this section (i.e.a 2D profile used for drawing 3D tesselation and visualization) By default a thin square section, use SetDrawShape() to change it.  
void  SetDrawThickness (double thickness_y, double thickness_z) 
Shortcut: adds a ChBeamSectionShapeRectangular for visualization as a centered rectangular beam, and sets its width/height. More...  
void  SetDrawCircularRadius (double draw_rad) 
Shortcut: adds a ChBeamSectionShapeCircular for visualization as a centered circular beam, and sets its radius. More...  
void  SetCircular (bool ic) 
OBSOLETE only for backward compability More...  
Additional Inherited Members  
Public Attributes inherited from chrono::fea::ChBeamSectionEulerSimple  
double  Area 
double  Iyy 
double  Izz 
double  J 
double  G 
double  E 
double  density 
double  Ks_y 
double  Ks_z 
Protected Attributes inherited from chrono::fea::ChBeamSectionEuler  
double  JzzJyy_factor 
Constructor & Destructor Documentation
◆ ChBeamSectionRayleighEasyCircular()
chrono::fea::ChBeamSectionRayleighEasyCircular::ChBeamSectionRayleighEasyCircular  (  double  diameter, 
double  E,  
double  G,  
double  density  
) 
 Parameters

diameter diameter of circular section E Young modulus G Shear modulus (only needed for the torsion) density volumetric density (ex. in SI units: [kg/m^3])
The documentation for this class was generated from the following files:
 /builds/uwsbel/chrono/src/chrono/fea/ChBeamSectionEuler.h
 /builds/uwsbel/chrono/src/chrono/fea/ChBeamSectionEuler.cpp