chrono::ChShaftsTorqueConverter Class Reference

Description

Class for defining a torque converter between two one-degree-of-freedom parts; i.e., shafts that can be used to build 1D models of powertrains.

Note that is not inherited from ChShaftsTorqueBase, because it requires a third part: the stator. The torque converter multiplies the input torque if there is slippage between input and output, then the multiplicative effect becomes closer to unity when the slippage is almost null; so it is similar to a variable-transmission-ratio gearbox, and just like any gearbox it requires a truss (the 'stator') that gets some torque. Note: it can work only in a given direction.

#include <ChShaftsTorqueConverter.h>

Inheritance diagram for chrono::ChShaftsTorqueConverter:
Collaboration diagram for chrono::ChShaftsTorqueConverter:

Public Member Functions

 ChShaftsTorqueConverter (const ChShaftsTorqueConverter &other)
 
virtual ChShaftsTorqueConverterClone () const override
 "Virtual" copy constructor (covariant return type).
 
virtual int GetDOC_c () override
 Number of scalar constraints.
 
virtual void IntLoadResidual_F (const unsigned int off, ChVectorDynamic<> &R, const double c) override
 Takes the F force term, scale and adds to R at given offset: R += c*F. More...
 
virtual void VariablesFbLoadForces (double factor) override
 Adds the current forces (applied to item) into the encapsulated ChVariables, in the 'fb' part: qf+=forces*factor.
 
bool Initialize (std::shared_ptr< ChShaft > mshaft1, std::shared_ptr< ChShaft > mshaft2, std::shared_ptr< ChShaft > mshaft_stator)
 Use this function after torque converter creation, to initialize it, given input and output shafts to join (plus the stator shaft, that should be fixed). More...
 
ChShaftGetShaftInput ()
 Get the input shaft.
 
ChShaftGetShaftOutput ()
 Get the output shaft.
 
ChShaftGetShaftStator ()
 Get the stator shaft (the truss)
 
void SetCurveCapacityFactor (std::shared_ptr< ChFunction > mf)
 Set the capacity factor curve, function of speed ratio R. More...
 
std::shared_ptr< ChFunctionGetCurveCapacityFactor ()
 Get the capacity factor curve.
 
void SetCurveTorqueRatio (std::shared_ptr< ChFunction > mf)
 Set the torque ratio curve, function of speed ratio R. More...
 
std::shared_ptr< ChFunctionGetCurveTorqueRatio ()
 Get the torque ratio curve.
 
double GetTorqueReactionOnInput () const
 Get the torque applied to the input shaft.
 
double GetTorqueReactionOnOutput () const
 Get the torque applied to the output shaft.
 
double GetTorqueReactionOnStator () const
 Get the torque applied to the stator shaft (the truss)
 
double GetSpeedRatio () const
 Get the actual peed ratio, as output speed / input speed. More...
 
double GetSlippage () const
 Get the actual slippage, for slippage = 1 complete slippage, for slippage = 0 perfect locking.
 
bool StateWarningReverseFlow ()
 State warning, at last update. More...
 
bool StateWarningWrongImpellerDirection ()
 State warning, at last update. More...
 
virtual void Update (double mytime, bool update_assets=true) override
 Update all auxiliary data of the gear transmission at given time.
 
virtual void ArchiveOUT (ChArchiveOut &marchive) override
 Method to allow serialization of transient data to archives.
 
virtual void ArchiveIN (ChArchiveIn &marchive) override
 Method to allow deserialization of transient data from archives. More...
 
- Public Member Functions inherited from chrono::ChPhysicsItem
 ChPhysicsItem (const ChPhysicsItem &other)
 
ChSystemGetSystem () const
 Get the pointer to the parent ChSystem()
 
virtual void SetSystem (ChSystem *m_system)
 Set the pointer to the parent ChSystem() and also add to new collision system / remove from old coll.system.
 
void AddAsset (std::shared_ptr< ChAsset > masset)
 Add an optional asset (it can be used to define visualization shapes, es ChSphereShape, or textures, or custom attached properties that the user can define by creating his class inherited from ChAsset)
 
std::vector< std::shared_ptr< ChAsset > > & GetAssets ()
 Access to the list of optional assets.
 
std::shared_ptr< ChAssetGetAssetN (unsigned int num)
 Access the Nth asset in the list of optional assets.
 
virtual ChFrame GetAssetsFrame (unsigned int nclone=0)
 Get the master coordinate system for assets that have some geometric meaning. More...
 
virtual unsigned int GetAssetsFrameNclones ()
 Optionally, a ChPhysicsItem can return multiple asset coordinate systems; this can be helpful if, for example, when a ChPhysicsItem contains 'clones' with the same assets (ex. More...
 
virtual bool GetCollide () const
 Tell if the object is subject to collision. More...
 
virtual void SyncCollisionModels ()
 If this physical item contains one or more collision models, synchronize their coordinates and bounding boxes to the state of the item.
 
virtual void AddCollisionModelsToSystem ()
 If this physical item contains one or more collision models, add them to the system's collision engine.
 
virtual void RemoveCollisionModelsFromSystem ()
 If this physical item contains one or more collision models, remove them from the system's collision engine.
 
virtual void GetTotalAABB (ChVector<> &bbmin, ChVector<> &bbmax)
 Get the entire AABB axis-aligned bounding box of the object. More...
 
virtual void GetCenter (ChVector<> &mcenter)
 Get a symbolic 'center' of the object. More...
 
virtual void StreamINstate (ChStreamInBinary &mstream)
 Method to deserialize only the state (position, speed) Must be implemented by child classes.
 
virtual void StreamOUTstate (ChStreamOutBinary &mstream)
 Method to serialize only the state (position, speed) Must be implemented by child classes.
 
virtual void Setup ()
 This might recompute the number of coordinates, DOFs, constraints, in case this might change (ex in ChAssembly), as well as state offsets of contained items (ex in ChMesh)
 
virtual void Update (bool update_assets=true)
 As above, but does not require updating of time-dependent data. More...
 
virtual void SetNoSpeedNoAcceleration ()
 Set zero speed (and zero accelerations) in state, without changing the position. More...
 
virtual int GetDOF ()
 Get the number of scalar coordinates (variables), if any, in this item. More...
 
virtual int GetDOF_w ()
 Get the number of scalar coordinates of variables derivatives (usually = DOF, but might be different than DOF, ex. More...
 
virtual int GetDOC ()
 Get the number of scalar constraints, if any, in this item.
 
virtual int GetDOC_d ()
 Get the number of scalar constraints, if any, in this item (only unilateral constr.) Children classes might override this.
 
unsigned int GetOffset_x ()
 Get offset in the state vector (position part)
 
unsigned int GetOffset_w ()
 Get offset in the state vector (speed part)
 
unsigned int GetOffset_L ()
 Get offset in the lagrangian multipliers.
 
void SetOffset_x (const unsigned int moff)
 Set offset in the state vector (position part) Note: only the ChSystem::Setup function should use this.
 
void SetOffset_w (const unsigned int moff)
 Set offset in the state vector (speed part) Note: only the ChSystem::Setup function should use this.
 
void SetOffset_L (const unsigned int moff)
 Set offset in the lagrangian multipliers Note: only the ChSystem::Setup function should use this.
 
virtual void IntStateGather (const unsigned int off_x, ChState &x, const unsigned int off_v, ChStateDelta &v, double &T)
 From item's state to global state vectors y={x,v} pasting the states at the specified offsets. More...
 
virtual void IntStateScatter (const unsigned int off_x, const ChState &x, const unsigned int off_v, const ChStateDelta &v, const double T, bool full_update)
 From global state vectors y={x,v} to item's state (and update) fetching the states at the specified offsets. More...
 
virtual void IntStateGatherAcceleration (const unsigned int off_a, ChStateDelta &a)
 From item's state acceleration to global acceleration vector. More...
 
virtual void IntStateScatterAcceleration (const unsigned int off_a, const ChStateDelta &a)
 From global acceleration vector to item's state acceleration. More...
 
virtual void IntStateGatherReactions (const unsigned int off_L, ChVectorDynamic<> &L)
 From item's reaction forces to global reaction vector. More...
 
virtual void IntStateScatterReactions (const unsigned int off_L, const ChVectorDynamic<> &L)
 From global reaction vector to item's reaction forces. More...
 
virtual void IntStateIncrement (const unsigned int off_x, ChState &x_new, const ChState &x, const unsigned int off_v, const ChStateDelta &Dv)
 Computes x_new = x + Dt , using vectors at specified offsets. More...
 
virtual void IntLoadResidual_Mv (const unsigned int off, ChVectorDynamic<> &R, const ChVectorDynamic<> &w, const double c)
 Takes the M*v term, multiplying mass by a vector, scale and adds to R at given offset: R += c*M*w. More...
 
virtual void IntLoadResidual_CqL (const unsigned int off_L, ChVectorDynamic<> &R, const ChVectorDynamic<> &L, const double c)
 Takes the term Cq'*L, scale and adds to R at given offset: R += c*Cq'*L. More...
 
virtual void IntLoadConstraint_C (const unsigned int off, ChVectorDynamic<> &Qc, const double c, bool do_clamp, double recovery_clamp)
 Takes the term C, scale and adds to Qc at given offset: Qc += c*C. More...
 
virtual void IntLoadConstraint_Ct (const unsigned int off, ChVectorDynamic<> &Qc, const double c)
 Takes the term Ct, scale and adds to Qc at given offset: Qc += c*Ct. More...
 
virtual void IntToDescriptor (const unsigned int off_v, const ChStateDelta &v, const ChVectorDynamic<> &R, const unsigned int off_L, const ChVectorDynamic<> &L, const ChVectorDynamic<> &Qc)
 Prepare variables and constraints to accommodate a solution: More...
 
virtual void IntFromDescriptor (const unsigned int off_v, ChStateDelta &v, const unsigned int off_L, ChVectorDynamic<> &L)
 After a solver solution, fetch values from variables and constraints into vectors: More...
 
virtual void VariablesFbReset ()
 Sets the 'fb' part (the known term) of the encapsulated ChVariables to zero.
 
virtual void VariablesQbLoadSpeed ()
 Initialize the 'qb' part of the ChVariables with the current value of speeds. More...
 
virtual void VariablesFbIncrementMq ()
 Adds M*q (masses multiplied current 'qb') to Fb, ex. More...
 
virtual void VariablesQbSetSpeed (double step=0)
 Fetches the item speed (ex. More...
 
virtual void VariablesQbIncrementPosition (double step)
 Increment item positions by the 'qb' part of the ChVariables, multiplied by a 'step' factor. More...
 
virtual void InjectVariables (ChSystemDescriptor &mdescriptor)
 Tell to a system descriptor that there are variables of type ChVariables in this object (for further passing it to a solver) Basically does nothing, but maybe that inherited classes may specialize this.
 
virtual void InjectConstraints (ChSystemDescriptor &mdescriptor)
 Tell to a system descriptor that there are constraints of type ChConstraint in this object (for further passing it to a solver) Basically does nothing, but maybe that inherited classes may specialize this.
 
virtual void ConstraintsBiReset ()
 Sets to zero the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsBiLoad_C (double factor=1, double recovery_clamp=0.1, bool do_clamp=false)
 Adds the current C (constraint violation) to the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsBiLoad_Ct (double factor=1)
 Adds the current Ct (partial t-derivative, as in C_dt=0-> [Cq]*q_dt=-Ct) to the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsBiLoad_Qc (double factor=1)
 Adds the current Qc (the vector of C_dtdt=0 -> [Cq]*q_dtdt=Qc ) to the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsFbLoadForces (double factor=1)
 Adds the current link-forces, if any, (caused by springs, etc.) to the 'fb' vectors of the ChVariables referenced by encapsulated ChConstraints.
 
virtual void ConstraintsLoadJacobians ()
 Adds the current jacobians in encapsulated ChConstraints.
 
virtual void ConstraintsFetch_react (double factor=1)
 Fetches the reactions from the lagrangian multiplier (l_i) of encapsulated ChConstraints. More...
 
virtual void InjectKRMmatrices (ChSystemDescriptor &mdescriptor)
 Tell to a system descriptor that there are items of type ChKblock in this object (for further passing it to a solver) Basically does nothing, but maybe that inherited classes may specialize this.
 
virtual void KRMmatricesLoad (double Kfactor, double Rfactor, double Mfactor)
 Adds the current stiffness K and damping R and mass M matrices in encapsulated ChKblock item(s), if any. More...
 
- Public Member Functions inherited from chrono::ChObj
 ChObj (const ChObj &other)
 
int GetIdentifier () const
 Gets the numerical identifier of the object.
 
void SetIdentifier (int id)
 Sets the numerical identifier of the object.
 
double GetChTime () const
 Gets the simulation time of this object.
 
void SetChTime (double m_time)
 Sets the simulation time of this object.
 
const char * GetName () const
 Gets the name of the object as C Ascii null-terminated string -for reading only!
 
void SetName (const char myname[])
 Sets the name of this object, as ascii string.
 
std::string GetNameString () const
 Gets the name of the object as C Ascii null-terminated string.
 
void SetNameString (const std::string &myname)
 Sets the name of this object, as std::string.
 
void MFlagsSetAllOFF (int &mflag)
 
void MFlagsSetAllON (int &mflag)
 
void MFlagSetON (int &mflag, int mask)
 
void MFlagSetOFF (int &mflag, int mask)
 
int MFlagGet (int &mflag, int mask)
 
virtual std::string & ArchiveContainerName ()
 

Additional Inherited Members

- Protected Attributes inherited from chrono::ChPhysicsItem
ChSystemsystem
 parent system
 
std::vector< std::shared_ptr< ChAsset > > assets
 set of assets
 
unsigned int offset_x
 offset in vector of state (position part)
 
unsigned int offset_w
 offset in vector of state (speed part)
 
unsigned int offset_L
 offset in vector of lagrangian multipliers
 
- Protected Attributes inherited from chrono::ChObj
double ChTime
 the time of simulation for the object
 

Member Function Documentation

◆ ArchiveIN()

void chrono::ChShaftsTorqueConverter::ArchiveIN ( ChArchiveIn marchive)
overridevirtual

Method to allow deserialization of transient data from archives.

Method to allow de serialization of transient data from archives.

Reimplemented from chrono::ChPhysicsItem.

◆ GetSpeedRatio()

double chrono::ChShaftsTorqueConverter::GetSpeedRatio ( ) const

Get the actual peed ratio, as output speed / input speed.

Assumes output has same direction as input, and slower than input otherwise exchanges input and output. For speed ratio = 0, complete slippage, for ratio=1 perfect locking.

◆ Initialize()

bool chrono::ChShaftsTorqueConverter::Initialize ( std::shared_ptr< ChShaft mshaft1,
std::shared_ptr< ChShaft mshaft2,
std::shared_ptr< ChShaft mshaft_stator 
)

Use this function after torque converter creation, to initialize it, given input and output shafts to join (plus the stator shaft, that should be fixed).

Each shaft must belong to the same ChSystem.

Parameters
mshaft1input shaft
mshaft2output shaft
mshaft_statorstator shaft (often fixed)

◆ IntLoadResidual_F()

void chrono::ChShaftsTorqueConverter::IntLoadResidual_F ( const unsigned int  off,
ChVectorDynamic<> &  R,
const double  c 
)
overridevirtual

Takes the F force term, scale and adds to R at given offset: R += c*F.

Parameters
offoffset in R residual
Rresult: the R residual, R += c*F
ca scaling factor

Reimplemented from chrono::ChPhysicsItem.

◆ SetCurveCapacityFactor()

void chrono::ChShaftsTorqueConverter::SetCurveCapacityFactor ( std::shared_ptr< ChFunction mf)
inline

Set the capacity factor curve, function of speed ratio R.

It is K(R)= input speed / square root of the input torque. Units: (rad/s) / sqrt(Nm)

◆ SetCurveTorqueRatio()

void chrono::ChShaftsTorqueConverter::SetCurveTorqueRatio ( std::shared_ptr< ChFunction mf)
inline

Set the torque ratio curve, function of speed ratio R.

It is T(R) = (output torque) / (input torque)

◆ StateWarningReverseFlow()

bool chrono::ChShaftsTorqueConverter::StateWarningReverseFlow ( )
inline

State warning, at last update.

Tell if the torque converter is working in reverse power flow, i.e. the output turbine is running faster than input impeller shaft.

◆ StateWarningWrongImpellerDirection()

bool chrono::ChShaftsTorqueConverter::StateWarningWrongImpellerDirection ( )
inline

State warning, at last update.

Tell if the torque converter is working with the input shaft in the reverse direction (negative speed). This is considered an abnormal behavior, and torques are forced to zero.


The documentation for this class was generated from the following files:
  • /builds/uwsbel/chrono/src/chrono/physics/ChShaftsTorqueConverter.h
  • /builds/uwsbel/chrono/src/chrono/physics/ChShaftsTorqueConverter.cpp