chrono::ChShaftsGear Class Reference

Description

Class for defining a 'transmission ratio' (a 1D gear) between two one-degree-of-freedom parts; i.e., shafts that can be used to build 1D models of powertrains.

This is more efficient than simulating power trains modeled with full 3D ChBody objects. Note that this really simple constraint does not provide a way to transmit a reaction force to the truss, if this is needed, just use the ChShaftsPlanetary with a fixed carrier shaft, or the ChShaftGearbox.

#include <ChShaftsGear.h>

Inheritance diagram for chrono::ChShaftsGear:
Collaboration diagram for chrono::ChShaftsGear:

Public Member Functions

 ChShaftsGear (const ChShaftsGear &other)
 
virtual ChShaftsGearClone () const override
 "Virtual" copy constructor (covariant return type).
 
virtual int GetDOC_c () override
 Number of scalar constraints.
 
virtual void IntStateGatherReactions (const unsigned int off_L, ChVectorDynamic<> &L) override
 From item's reaction forces to global reaction vector. More...
 
virtual void IntStateScatterReactions (const unsigned int off_L, const ChVectorDynamic<> &L) override
 From global reaction vector to item's reaction forces. More...
 
virtual void IntLoadResidual_CqL (const unsigned int off_L, ChVectorDynamic<> &R, const ChVectorDynamic<> &L, const double c) override
 Takes the term Cq'*L, scale and adds to R at given offset: R += c*Cq'*L. More...
 
virtual void IntLoadConstraint_C (const unsigned int off, ChVectorDynamic<> &Qc, const double c, bool do_clamp, double recovery_clamp) override
 Takes the term C, scale and adds to Qc at given offset: Qc += c*C. More...
 
virtual void IntToDescriptor (const unsigned int off_v, const ChStateDelta &v, const ChVectorDynamic<> &R, const unsigned int off_L, const ChVectorDynamic<> &L, const ChVectorDynamic<> &Qc) override
 Prepare variables and constraints to accommodate a solution: More...
 
virtual void IntFromDescriptor (const unsigned int off_v, ChStateDelta &v, const unsigned int off_L, ChVectorDynamic<> &L) override
 After a solver solution, fetch values from variables and constraints into vectors: More...
 
virtual void InjectConstraints (ChSystemDescriptor &mdescriptor) override
 Tell to a system descriptor that there are constraints of type ChConstraint in this object (for further passing it to a solver) Basically does nothing, but maybe that inherited classes may specialize this.
 
virtual void ConstraintsBiReset () override
 Sets to zero the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsBiLoad_C (double factor=1, double recovery_clamp=0.1, bool do_clamp=false) override
 Adds the current C (constraint violation) to the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsLoadJacobians () override
 Adds the current jacobians in encapsulated ChConstraints.
 
virtual void ConstraintsFetch_react (double factor=1) override
 Fetches the reactions from the lagrangian multiplier (l_i) of encapsulated ChConstraints. More...
 
bool Initialize (std::shared_ptr< ChShaft > mshaft1, std::shared_ptr< ChShaft > mshaft2) override
 Use this function after gear creation, to initialize it, given two shafts to join. More...
 
void SetTransmissionRatio (double mt)
 Set the transmission ratio t, as in w2=t*w1, or t=w2/w1 , or t*w1 - w2 = 0. More...
 
double GetTransmissionRatio () const
 Get the transmission ratio t, as in w2=t*w1, or t=w2/w1.
 
void SetAvoidPhaseDrift (bool mb)
 Set if the constraint must avoid phase drift. More...
 
bool GetAvoidPhaseDrift ()
 Set if the constraint is in "avoid phase drift" mode.
 
double GetTorqueReactionOn1 () const override
 Get the reaction torque exchanged between the two shafts, considered as applied to the 1st axis.
 
double GetTorqueReactionOn2 () const override
 Get the reaction torque exchanged between the two shafts, considered as applied to the 2nd axis.
 
double GetConstraintViolation () const
 Return current constraint violation.
 
virtual void Update (double mytime, bool update_assets=true) override
 Update all auxiliary data of the gear transmission at given time.
 
virtual void ArchiveOUT (ChArchiveOut &marchive) override
 Method to allow serialization of transient data to archives.
 
virtual void ArchiveIN (ChArchiveIn &marchive) override
 Method to allow deserialization of transient data from archives. More...
 
- Public Member Functions inherited from chrono::ChShaftsCouple
 ChShaftsCouple (const ChShaftsCouple &other)
 
virtual int GetNumCoords ()
 Get the number of scalar variables affected by constraints in this link.
 
ChShaftGetShaft1 ()
 Get the first (input) shaft.
 
ChShaftGetShaft2 ()
 Get the second (output) shaft.
 
double GetRelativeRotation () const
 Get the actual relative angle in terms of phase of shaft 1 respect to 2.
 
double GetRelativeRotation_dt () const
 Get the actual relative speed in terms of speed of shaft 1 respect to 2.
 
double GetRelativeRotation_dtdt () const
 Get the actual relative acceleration in terms of speed of shaft 1 respect to 2.
 
- Public Member Functions inherited from chrono::ChPhysicsItem
 ChPhysicsItem (const ChPhysicsItem &other)
 
ChSystemGetSystem () const
 Get the pointer to the parent ChSystem()
 
virtual void SetSystem (ChSystem *m_system)
 Set the pointer to the parent ChSystem() and also add to new collision system / remove from old coll.system.
 
void AddAsset (std::shared_ptr< ChAsset > masset)
 Add an optional asset (it can be used to define visualization shapes, es ChSphereShape, or textures, or custom attached properties that the user can define by creating his class inherited from ChAsset)
 
std::vector< std::shared_ptr< ChAsset > > & GetAssets ()
 Access to the list of optional assets.
 
std::shared_ptr< ChAssetGetAssetN (unsigned int num)
 Access the Nth asset in the list of optional assets.
 
virtual ChFrame GetAssetsFrame (unsigned int nclone=0)
 Get the master coordinate system for assets that have some geometric meaning. More...
 
virtual unsigned int GetAssetsFrameNclones ()
 Optionally, a ChPhysicsItem can return multiple asset coordinate systems; this can be helpful if, for example, when a ChPhysicsItem contains 'clones' with the same assets (ex. More...
 
virtual bool GetCollide () const
 Tell if the object is subject to collision. More...
 
virtual void SyncCollisionModels ()
 If this physical item contains one or more collision models, synchronize their coordinates and bounding boxes to the state of the item.
 
virtual void AddCollisionModelsToSystem ()
 If this physical item contains one or more collision models, add them to the system's collision engine.
 
virtual void RemoveCollisionModelsFromSystem ()
 If this physical item contains one or more collision models, remove them from the system's collision engine.
 
virtual void GetTotalAABB (ChVector<> &bbmin, ChVector<> &bbmax)
 Get the entire AABB axis-aligned bounding box of the object. More...
 
virtual void GetCenter (ChVector<> &mcenter)
 Get a symbolic 'center' of the object. More...
 
virtual void StreamINstate (ChStreamInBinary &mstream)
 Method to deserialize only the state (position, speed) Must be implemented by child classes.
 
virtual void StreamOUTstate (ChStreamOutBinary &mstream)
 Method to serialize only the state (position, speed) Must be implemented by child classes.
 
virtual void Setup ()
 This might recompute the number of coordinates, DOFs, constraints, in case this might change (ex in ChAssembly), as well as state offsets of contained items (ex in ChMesh)
 
virtual void Update (bool update_assets=true)
 As above, but does not require updating of time-dependent data. More...
 
virtual void SetNoSpeedNoAcceleration ()
 Set zero speed (and zero accelerations) in state, without changing the position. More...
 
virtual int GetDOF ()
 Get the number of scalar coordinates (variables), if any, in this item. More...
 
virtual int GetDOF_w ()
 Get the number of scalar coordinates of variables derivatives (usually = DOF, but might be different than DOF, ex. More...
 
virtual int GetDOC ()
 Get the number of scalar constraints, if any, in this item.
 
virtual int GetDOC_d ()
 Get the number of scalar constraints, if any, in this item (only unilateral constr.) Children classes might override this.
 
unsigned int GetOffset_x ()
 Get offset in the state vector (position part)
 
unsigned int GetOffset_w ()
 Get offset in the state vector (speed part)
 
unsigned int GetOffset_L ()
 Get offset in the lagrangian multipliers.
 
void SetOffset_x (const unsigned int moff)
 Set offset in the state vector (position part) Note: only the ChSystem::Setup function should use this.
 
void SetOffset_w (const unsigned int moff)
 Set offset in the state vector (speed part) Note: only the ChSystem::Setup function should use this.
 
void SetOffset_L (const unsigned int moff)
 Set offset in the lagrangian multipliers Note: only the ChSystem::Setup function should use this.
 
virtual void IntStateGather (const unsigned int off_x, ChState &x, const unsigned int off_v, ChStateDelta &v, double &T)
 From item's state to global state vectors y={x,v} pasting the states at the specified offsets. More...
 
virtual void IntStateScatter (const unsigned int off_x, const ChState &x, const unsigned int off_v, const ChStateDelta &v, const double T)
 From global state vectors y={x,v} to item's state (and update) fetching the states at the specified offsets. More...
 
virtual void IntStateGatherAcceleration (const unsigned int off_a, ChStateDelta &a)
 From item's state acceleration to global acceleration vector. More...
 
virtual void IntStateScatterAcceleration (const unsigned int off_a, const ChStateDelta &a)
 From global acceleration vector to item's state acceleration. More...
 
virtual void IntStateIncrement (const unsigned int off_x, ChState &x_new, const ChState &x, const unsigned int off_v, const ChStateDelta &Dv)
 Computes x_new = x + Dt , using vectors at specified offsets. More...
 
virtual void IntLoadResidual_F (const unsigned int off, ChVectorDynamic<> &R, const double c)
 Takes the F force term, scale and adds to R at given offset: R += c*F. More...
 
virtual void IntLoadResidual_Mv (const unsigned int off, ChVectorDynamic<> &R, const ChVectorDynamic<> &w, const double c)
 Takes the M*v term, multiplying mass by a vector, scale and adds to R at given offset: R += c*M*w. More...
 
virtual void IntLoadConstraint_Ct (const unsigned int off, ChVectorDynamic<> &Qc, const double c)
 Takes the term Ct, scale and adds to Qc at given offset: Qc += c*Ct. More...
 
virtual void VariablesFbReset ()
 Sets the 'fb' part (the known term) of the encapsulated ChVariables to zero.
 
virtual void VariablesFbLoadForces (double factor=1)
 Adds the current forces (applied to item) into the encapsulated ChVariables, in the 'fb' part: qf+=forces*factor.
 
virtual void VariablesQbLoadSpeed ()
 Initialize the 'qb' part of the ChVariables with the current value of speeds. More...
 
virtual void VariablesFbIncrementMq ()
 Adds M*q (masses multiplied current 'qb') to Fb, ex. More...
 
virtual void VariablesQbSetSpeed (double step=0)
 Fetches the item speed (ex. More...
 
virtual void VariablesQbIncrementPosition (double step)
 Increment item positions by the 'qb' part of the ChVariables, multiplied by a 'step' factor. More...
 
virtual void InjectVariables (ChSystemDescriptor &mdescriptor)
 Tell to a system descriptor that there are variables of type ChVariables in this object (for further passing it to a solver) Basically does nothing, but maybe that inherited classes may specialize this.
 
virtual void ConstraintsBiLoad_Ct (double factor=1)
 Adds the current Ct (partial t-derivative, as in C_dt=0-> [Cq]*q_dt=-Ct) to the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsBiLoad_Qc (double factor=1)
 Adds the current Qc (the vector of C_dtdt=0 -> [Cq]*q_dtdt=Qc ) to the known term (b_i) of encapsulated ChConstraints.
 
virtual void ConstraintsFbLoadForces (double factor=1)
 Adds the current link-forces, if any, (caused by springs, etc.) to the 'fb' vectors of the ChVariables referenced by encapsulated ChConstraints.
 
virtual void InjectKRMmatrices (ChSystemDescriptor &mdescriptor)
 Tell to a system descriptor that there are items of type ChKblock in this object (for further passing it to a solver) Basically does nothing, but maybe that inherited classes may specialize this.
 
virtual void KRMmatricesLoad (double Kfactor, double Rfactor, double Mfactor)
 Adds the current stiffness K and damping R and mass M matrices in encapsulated ChKblock item(s), if any. More...
 
- Public Member Functions inherited from chrono::ChObj
 ChObj (const ChObj &other)
 
int GetIdentifier () const
 Gets the numerical identifier of the object.
 
void SetIdentifier (int id)
 Sets the numerical identifier of the object.
 
double GetChTime () const
 Gets the simulation time of this object.
 
void SetChTime (double m_time)
 Sets the simulation time of this object.
 
const char * GetName () const
 Gets the name of the object as C Ascii null-terminated string -for reading only!
 
void SetName (const char myname[])
 Sets the name of this object, as ascii string.
 
std::string GetNameString () const
 Gets the name of the object as C Ascii null-terminated string.
 
void SetNameString (const std::string &myname)
 Sets the name of this object, as std::string.
 
void MFlagsSetAllOFF (int &mflag)
 
void MFlagsSetAllON (int &mflag)
 
void MFlagSetON (int &mflag, int mask)
 
void MFlagSetOFF (int &mflag, int mask)
 
int MFlagGet (int &mflag, int mask)
 
virtual std::string & ArchiveContainerName ()
 

Additional Inherited Members

- Protected Attributes inherited from chrono::ChShaftsCouple
ChShaftshaft1
 first shaft
 
ChShaftshaft2
 second shaft
 
- Protected Attributes inherited from chrono::ChPhysicsItem
ChSystemsystem
 parent system
 
std::vector< std::shared_ptr< ChAsset > > assets
 set of assets
 
unsigned int offset_x
 offset in vector of state (position part)
 
unsigned int offset_w
 offset in vector of state (speed part)
 
unsigned int offset_L
 offset in vector of lagrangian multipliers
 
- Protected Attributes inherited from chrono::ChObj
double ChTime
 the time of simulation for the object
 

Member Function Documentation

◆ ArchiveIN()

void chrono::ChShaftsGear::ArchiveIN ( ChArchiveIn marchive)
overridevirtual

Method to allow deserialization of transient data from archives.

Method to allow de serialization of transient data from archives.

Reimplemented from chrono::ChShaftsCouple.

◆ ConstraintsFetch_react()

void chrono::ChShaftsGear::ConstraintsFetch_react ( double  factor = 1)
overridevirtual

Fetches the reactions from the lagrangian multiplier (l_i) of encapsulated ChConstraints.

Mostly used after the solver provided the solution in ChConstraints. Also, should convert the reactions obtained from dynamical simulation, from link space to intuitive react_force and react_torque.

Reimplemented from chrono::ChPhysicsItem.

◆ Initialize()

bool chrono::ChShaftsGear::Initialize ( std::shared_ptr< ChShaft mshaft1,
std::shared_ptr< ChShaft mshaft2 
)
overridevirtual

Use this function after gear creation, to initialize it, given two shafts to join.

Each shaft must belong to the same ChSystem.

Parameters
mshaft1first shaft to join
mshaft2second shaft to join

Reimplemented from chrono::ChShaftsCouple.

◆ IntFromDescriptor()

void chrono::ChShaftsGear::IntFromDescriptor ( const unsigned int  off_v,
ChStateDelta v,
const unsigned int  off_L,
ChVectorDynamic<> &  L 
)
overridevirtual

After a solver solution, fetch values from variables and constraints into vectors:

Parameters
off_voffset for v
vvector to where the q 'unknowns' term of the variables will be copied
off_Loffset for L
Lvector to where L 'lagrangian ' term of the constraints will be copied

Reimplemented from chrono::ChPhysicsItem.

◆ IntLoadConstraint_C()

void chrono::ChShaftsGear::IntLoadConstraint_C ( const unsigned int  off,
ChVectorDynamic<> &  Qc,
const double  c,
bool  do_clamp,
double  recovery_clamp 
)
overridevirtual

Takes the term C, scale and adds to Qc at given offset: Qc += c*C.

Parameters
offoffset in Qc residual
Qcresult: the Qc residual, Qc += c*C
ca scaling factor
do_clampapply clamping to c*C?
recovery_clampvalue for min/max clamping of c*C

Reimplemented from chrono::ChPhysicsItem.

◆ IntLoadResidual_CqL()

void chrono::ChShaftsGear::IntLoadResidual_CqL ( const unsigned int  off_L,
ChVectorDynamic<> &  R,
const ChVectorDynamic<> &  L,
const double  c 
)
overridevirtual

Takes the term Cq'*L, scale and adds to R at given offset: R += c*Cq'*L.

Parameters
off_Loffset in L multipliers
Rresult: the R residual, R += c*Cq'*L
Lthe L vector
ca scaling factor

Reimplemented from chrono::ChPhysicsItem.

◆ IntStateGatherReactions()

void chrono::ChShaftsGear::IntStateGatherReactions ( const unsigned int  off_L,
ChVectorDynamic<> &  L 
)
overridevirtual

From item's reaction forces to global reaction vector.

Parameters
off_Loffset in L vector
LL vector of reaction forces

Reimplemented from chrono::ChPhysicsItem.

◆ IntStateScatterReactions()

void chrono::ChShaftsGear::IntStateScatterReactions ( const unsigned int  off_L,
const ChVectorDynamic<> &  L 
)
overridevirtual

From global reaction vector to item's reaction forces.

Parameters
off_Loffset in L vector
LL vector of reaction forces

Reimplemented from chrono::ChPhysicsItem.

◆ IntToDescriptor()

void chrono::ChShaftsGear::IntToDescriptor ( const unsigned int  off_v,
const ChStateDelta v,
const ChVectorDynamic<> &  R,
const unsigned int  off_L,
const ChVectorDynamic<> &  L,
const ChVectorDynamic<> &  Qc 
)
overridevirtual

Prepare variables and constraints to accommodate a solution:

Parameters
off_voffset for v and R
vvector that will be copied into the q 'unknowns' term of the variables (for warm starting)
Rvector that will be copied into the F 'force' term of the variables
off_Loffset for L and Qc
Lvector that will be copied into the L 'lagrangian ' term of the constraints (for warm starting)
Qcvector that will be copied into the Qb 'constraint' term of the constraints

Reimplemented from chrono::ChPhysicsItem.

◆ SetAvoidPhaseDrift()

void chrono::ChShaftsGear::SetAvoidPhaseDrift ( bool  mb)
inline

Set if the constraint must avoid phase drift.

If true, phasing is always tracked and the constraint is satisfied also at the position level. If false, microslipping can accumulate (as in friction wheels). Default is enabled.

◆ SetTransmissionRatio()

void chrono::ChShaftsGear::SetTransmissionRatio ( double  mt)
inline

Set the transmission ratio t, as in w2=t*w1, or t=w2/w1 , or t*w1 - w2 = 0.

For example, t=1 for a rigid joint; t=-0.5 for representing a couple of spur gears with teeth z1=20 & z2=40; t=0.1 for a gear with inner teeth (or epicycloidal reducer), etc.


The documentation for this class was generated from the following files:
  • /builds/uwsbel/chrono/src/chrono/physics/ChShaftsGear.h
  • /builds/uwsbel/chrono/src/chrono/physics/ChShaftsGear.cpp