chrono::fea::ChBeamSectionRayleighEasyCircular Class Reference

Description

This works exactly as ChBeamSectionEulerEasyCircular, but adds the effect of Jyy Jzz rotational sectional inertias.

#include <ChBeamSectionEuler.h>

Inheritance diagram for chrono::fea::ChBeamSectionRayleighEasyCircular:

Collaboration diagram for chrono::fea::ChBeamSectionRayleighEasyCircular:

Public Member Functions
	ChBeamSectionRayleighEasyCircular (double diameter, double E, double G, double density)
Public Member Functions inherited from chrono::fea::ChBeamSectionRayleighSimple
virtual void	ComputeInertiaMatrix (ChMatrixNM< double, 6, 6 > &M) override
	Compute the 6x6 sectional inertia matrix, as in {x_momentum,w_momentum}=[Mm]{xvel,wvel}.
virtual void	ComputeInertiaDampingMatrix (ChMatrixNM< double, 6, 6 > &Ri, const ChVector<> &mW) override
	Compute the 6x6 sectional inertia damping matrix [Ri] (gyroscopic matrix damping) More...
virtual void	ComputeInertiaStiffnessMatrix (ChMatrixNM< double, 6, 6 > &Ki, const ChVector<> &mWvel, const ChVector<> &mWacc, const ChVector<> &mXacc) override
	Compute the 6x6 sectional inertia stiffness matrix [Ki^]. More...
virtual void	ComputeQuadraticTerms (ChVector<> &mF, ChVector<> &mT, const ChVector<> &mW) override
	Compute the centrifugal term and gyroscopic term. More...
Public Member Functions inherited from chrono::fea::ChBeamSectionEulerSimple
void	SetArea (const double ma)
	Set the cross sectional area A of the beam (m^2)
double	GetArea () const
void	SetIyy (double ma)
	Set the Iyy moment of inertia of the beam (for flexion about y axis) Note: some textbook calls this Iyy as Iz.
double	GetIyy () const
void	SetIzz (double ma)
	Set the Izz moment of inertia of the beam (for flexion about z axis) Note: some textbook calls this Izz as Iy.
double	GetIzz () const
void	SetJ (double ma)
	Set the J torsion constant of the beam (for torsion about x axis)
double	GetJ () const
void	SetKsy (double ma)
	Set the Timoshenko shear coefficient Ks for y shear, usually about 0.8, (for elements that use this, ex. More...
double	GetKsy () const
void	SetKsz (double ma)
	Set the Timoshenko shear coefficient Ks for z shear, usually about 0.8, (for elements that use this, ex. More...
double	GetKsz () const
void	SetAsRectangularSection (double width_y, double width_z)
	Shortcut: set Area, Ixx, Iyy, Ksy, Ksz and J torsion constant at once, given the y and z widths of the beam assumed with rectangular shape.
void	SetAsCircularSection (double diameter)
	Shortcut: set Area, Ixx, Iyy, Ksy, Ksz and J torsion constant at once, given the diameter of the beam assumed with circular shape.
void	SetDensity (double md)
	Set the density of the beam (kg/m^3)
double	GetDensity () const
void	SetYoungModulus (double mE)
	Set E, the Young elastic modulus (N/m^2)
double	GetYoungModulus () const
void	SetGshearModulus (double mG)
	Set G, the shear modulus, used for computing the torsion rigidity = J*G.
double	GetGshearModulus () const
void	SetGwithPoissonRatio (double mpoisson)
	Set G, the shear modulus, given current E and the specified Poisson ratio.
virtual double	GetAxialRigidity () const override
	Gets the axial rigidity, usually A*E, but might be ad hoc.
virtual double	GetXtorsionRigidity () const override
	Gets the torsion rigidity, for torsion about X axis at elastic center, usually J*G, but might be ad hoc.
virtual double	GetYbendingRigidity () const override
	Gets the bending rigidity, for bending about Y axis at elastic center, usually Iyy*E, but might be ad hoc.
virtual double	GetZbendingRigidity () const override
	Gets the bending rigidity, for bending about Z axis at elastic center, usually Izz*E, but might be ad hoc.
virtual double	GetSectionRotation () const override
	Set the rotation of the Y Z section axes for which the YbendingRigidity and ZbendingRigidity are defined.
virtual double	GetCentroidY () const override
	Gets the Y position of the elastic center respect to centerline.
virtual double	GetCentroidZ () const override
	Gets the Z position of the elastic center respect to centerline.
virtual double	GetShearCenterY () const override
	Gets the Y position of the shear center respect to centerline.
virtual double	GetShearCenterZ () const override
	Gets the Z position of the shear center respect to centerline.
virtual double	GetMassPerUnitLength () const override
	Get mass per unit length, ex.SI units [kg/m].
virtual double	GetInertiaJxxPerUnitLength () const override
	Get the Jxx component of the inertia per unit length (polar inertia) in the Y Z unrotated reference frame of the section at centerline. More...
Public Member Functions inherited from chrono::fea::ChBeamSectionEuler
virtual void	ComputeInertialForce (ChVector<> &mFi, ChVector<> &mTi, const ChVector<> &mWvel, const ChVector<> &mWacc, const ChVector<> &mXacc)
	Compute the total inertial forces (per unit length). More...
void	SetArtificialJyyJzzFactor (double mf)
	The Euler beam model has no rotational inertia per each section, assuming mass is concentrated on the centerline. More...
double	GetArtificialJyyJzzFactor ()
virtual void	SetBeamRaleyghDampingAlpha (double malpha)
	Set the "alpha" Rayleigh damping ratio, the mass-proportional structural damping in: R = alpha*M + beta*K
double	GetBeamRaleyghDampingAlpha ()
virtual void	SetBeamRaleyghDampingBeta (double mbeta)
	Set the "beta" Rayleigh damping ratio, the stiffness-proportional structural damping in: R = alpha*M + beta*K
double	GetBeamRaleyghDampingBeta ()
virtual void	SetBeamRaleyghDamping (double mbeta, double malpha=0)
	Set both beta and alpha coefficients in Rayleigh damping model: R = alpha*M + beta*K. More...
Public Member Functions inherited from chrono::fea::ChBeamSection
void	SetDrawShape (std::shared_ptr< ChBeamSectionShape > mshape)
	Set the graphical representation for this section. More...
std::shared_ptr< ChBeamSectionShape >	GetDrawShape () const
	Get the drawing shape of this section (i.e.a 2D profile used for drawing 3D tesselation and visualization) By default a thin square section, use SetDrawShape() to change it.
void	SetDrawThickness (double thickness_y, double thickness_z)
	Shortcut: adds a ChBeamSectionShapeRectangular for visualization as a centered rectangular beam, and sets its width/height. More...
void	SetDrawCircularRadius (double draw_rad)
	Shortcut: adds a ChBeamSectionShapeCircular for visualization as a centered circular beam, and sets its radius. More...
void	SetCircular (bool ic)
	OBSOLETE only for backward compability

Additional Inherited Members
Public Attributes inherited from chrono::fea::ChBeamSectionEulerSimple
double	Area
double	Iyy
double	Izz
double	J
double	G
double	E
double	density
double	Ks_y
double	Ks_z
Public Attributes inherited from chrono::fea::ChBeamSectionEuler
bool	compute_inertia_damping_matrix = true
	Flag that turns on/off the computation of the [Ri] 'gyroscopic' inertial damping matrix. More...
bool	compute_inertia_stiffness_matrix = true
	Flag that turns on/off the computation of the [Ki] inertial stiffness matrix. More...
bool	compute_Ri_Ki_by_num_diff = false
	Flag for computing the Ri and Ki matrices via numerical differentiation even if an analytical expression is provided. More...
Protected Attributes inherited from chrono::fea::ChBeamSectionEuler
double	rdamping_beta
double	rdamping_alpha
double	JzzJyy_factor

Constructor & Destructor Documentation

ChBeamSectionRayleighEasyCircular()

chrono::fea::ChBeamSectionRayleighEasyCircular::ChBeamSectionRayleighEasyCircular	(	double	diameter,
		double	E,
		double	G,
		double	density
	)

Parameters

diameter	diameter of circular section
E	Young modulus
G	Shear modulus (only needed for the torsion)
density	volumetric density (ex. in SI units: [kg/m^3])

---

The documentation for this class was generated from the following files:

• /builds/uwsbel/chrono/src/chrono/fea/ChBeamSectionEuler.h
• /builds/uwsbel/chrono/src/chrono/fea/ChBeamSectionEuler.cpp