Multibody system nodes

Description

This module defines concrete multibody system nodes:

Additionally, this module provides various drawbar pull rigs which can be attached to any of the MBS nodes:

  • ChVehicleCosimDBPRigImposedSlip allows imposing known (fixed) vehicle forward linear velocity and wheel angular velocity to maintain a prescribed value of the longitudinal slip. The actuation specifies if the linear velocity or angular velocity is considered as "base velocity", with the other one derived from the slip value. The DBP force is extracted as the reaction force required to enforce the vehicle forward linear velocity (at steady state). Each run of this experiment produces one point on the slip-DBP curve.
  • ChVehicleCosimDBPRigImposedAngVel enforces a prescribed wheel angular velocity. A linearly increasing resistive force is applied against the forward motion of the vehicle and the experiment is ended when the vehicle stops. At each time, the vehicle forward speed and resulting slip are calculated and stored together with the current resistive force (DBP). This experiment produces the entire slip-DBP curve at once.
Collaboration diagram for Multibody system nodes:

Classes

class  chrono::vehicle::ChVehicleCosimDBPRig
 Base class for a drawbar-pull rig mechanism. More...
 
class  chrono::vehicle::ChVehicleCosimDBPRigImposedSlip
 Drawbar-pull rig mechanism with imposed slip. More...
 
class  chrono::vehicle::ChVehicleCosimDBPRigImposedAngVel
 Drawbar-pull rig mechanism with imposed angular velocity. More...
 
class  chrono::vehicle::ChVehicleCosimCuriosityNode
 Curiosity rover co-simulation node. More...
 
class  chrono::vehicle::ChVehicleCosimRigNode
 Mechanism for a single-wheel testing rig. More...
 
class  chrono::vehicle::ChVehicleCosimTrackedVehicleNode
 Tracked vehicle co-simulation node. More...
 
class  chrono::vehicle::ChVehicleCosimViperNode
 Viper rover co-simulation node. More...
 
class  chrono::vehicle::ChVehicleCosimWheeledVehicleNode
 Wheeled vehicle co-simulation node. More...